Ruger 10/22

Ruger 10/22 rifles are ideally suited for informal target shooting, plinking, small game hunting, and action-shooting events. Many models exist, including the standard 10/22 Carbine, the Ruger Deluxe Sporter, the Ruger All-Weather 10/22, Rifle models, a Compact model, and a Target model.

mspasfeh054

-

Ruger blackhawk

This one I took in on a trade 5 years ago and fired it once. It is in great shape and fired very well and was more acccurate than Ruger blackhawk . I did adjust the sights ( which are adjustable) and was very pleased with the groups it shot. It has very slight wear near the end of the barrel but small Ruger super blackhawk, Cylinder looks great.

mspasfeh033

-

cz 52

SPF This is a custom fully hardchromed CZ52 in 7.62×25. Comes with two factory mags, cleaning rod, and factory leather holster with ink stamps intact inside flap. Plating done by Classic Arms. Pistol has been shot 25 times. Excellent condition. $225 shipped to your FFL.cz 52 pistol

mspasfeh022

-

Colt Defender

Here’s the story:

Picked up a new Colt Defender two weeks ago. Went to the range, had some extraction problems; fairly random, but every 15 rounds, or so, the extractor would jump the rim and fail to extract. Get it home, check the extractor tension…is very weak. Well, no big deal, was going to have a local smith do a trigger job, so I figure Ill have him tune the extractor while it’s there.

I have two brand new sets of Colt original equipment grip panels with Colt gold medallion for a Colt Government model. They have been sitting in storage for the 380 colt mustang. $25 shipped for each pair, buy both sets for $45 shipped.

So, pick the pistol up today (great trigger job BTW) and head straight to the range. Same crap. Head straight back to the smith, he adjusts the tension again. Get home, strip the pistol and check the tension with the extractor in the pistol (using the loaded round/shake the slide method). The extractor barely grips WWB cases, and Corbon and Speer brass falls right out. Scratch my head.

At this point I pull out two other 1911s that I know have perfect extractors (est. 8000 rounds through both with no extraction issues); both Kimbers. I remove the extractors from both pistols, and check the Colt 25 extractor in both. Tension is perfect in both Kimbers. So, I then try both of the Kimber extractors in the Colt…same problem, no tension on the case. At this point I’m getting what the problem is. Nevertheless, just to be sure, I grab a spare extractor to play around with. No matter how much bend I put in the Colt 1903, it still will not grip the case any harder; I had that extractor bent pretty much sideways and it made no ruger p 85 other than barely being able to push it in the channel.

Visually it appears the Colt extractor channel was cut too far to the side of the slide for the extractor to be tensioned, regardless of how much it is bent. Have not measured it, but based on the results from the three different p85 ruger, I’m guessing it is out of colt officer model

Agree? If not, what is your theory?

mspasfeh020

-

Colt 45 1911

I want to make something happen. I always try to be fair in my dealing. I understand FN is no longer going to import the Hi Power; take that for what it’s worth in the effect on values.

Well I think I lost it. I offered to buy a colt 1911 part sight unseen the other day. The price seemed right so what the hell. Well the gentleman showed up with it and I bought it. I have to say I’m not a fan of nickle plating but it’s growing on me.
I can’t figure out the barrel set up. The barrel sticks out the front a half inch? It looks like a bull barrel with no p85 ruger. The guide rod is a full length one in blued.

mspasfeh013

-

AR-15

The Bushmaster Carbon AR-15 Type 21S pistol has top of the line features of the popular Type 97S rifle in a package that weighs less than three and a half pounds. The upper and lower receivers are molded of state of the art Carbon Fiber 15 material that offers incredible durability, strength and ultra-light weight. The pistol s 7 1/4″ stainless steel, match grade barrel is chambered for the 5.56 NATO cartridge and readily accepts the .223 Remington cartridge as well.

mspasfeh058

-

colt model 1911

I want to make something happen. I always try to be fair in my dealing. I understand FN is no longer going to import the Colt 1908 ; take that for what it’s worth in the effect on 380 colt government mustang .

Well I think I lost it. I offered to buy a 1911 colt development government model model sight unseen the other day. The price seemed right so what the hell. Well the gentleman showed up with it and I bought it. I have to say I’m not a fan of nickle plating but it’s growing on me.
I can’t figure out the barrel set up. The barrel sticks out the front a half inch? It looks like a bull barrel with no bushing. The guide rod is a full length onecolt officer model

mspasfeh016

-

——————————————————————————–

Lacrosse league

the Lacrosse league keeps on getting deeper. but not that deep. i seriously doubt ursinus will do much next year and im not sure muhlenberg can do much more that they did this past season (which isnt bad, they had a good season in comparasin to most of their past). they graduated their all time leading point scorer or something and they werent even great goal scorers to begin with, they won their games with nonstop hustle. gettysburg will as always be stellar and the team to beat with 2 all american defenders and an all american goalie backing them up their GAA shouldnt be much higher than last years. WAC will always be a good team but will they be able to clinch the crucial games this next year (dickinson/g-burg). Dickinson will keep on getting better, their coach is good and they have some great young players ex. reed on attack did good things as a freshman. their defence seemed to be their weakest link but even then it wasnt that weak. I can see them to continuously move up in the rankings and becoming a great team. Mcdaniel was a team that lacrosse video on the edge this past season, losing close games to WAC and haverford but then getting blown out by gettysburg and playign a bad game against dickinson. i think they could go either way next season making the move up and winnign those difinitive games or continue losing them ans stay in the middle of the pack. but i think this year their offence has the firepower to take control. kirby on attack could do great thing this next season. their defence is young after losing an AA. i belive their most experienced defender is a sophomore. F&M doesnt have to do much this season to improve upon last season, their leading scorer was a freshman from colorado so the future could be bright. Haverford is a team I dont know much about, all i know is they suprised a lot of people last season and they have a nasty pole. Swarthmore doesnt seem to be an impressive team and didnt seem to have much of a chance for changin thats, but i never saw them play.

mspmwg43

AR-15

Firing controls on the Type 97 Pistol are in the familiar AR-15 layout, and for additional safety, the Safety Selector Lever markings are color-coded on both sides of the Lower Receiver to quickly determine the firing status of the pistol. The Charging Handle is molded of Carbon Fiber, and captivated takedown pins allow Upper and Lower Receiver separation for easy cleaning and lubrication. The Type 97 Pistol includes iron sights - the rear is a ghost ring type, and the front sight is a heavy blade integral to the gas block. The gas tube is enclosed for strength and the enclosure is vented to aid in cooling. An ergonomically designed Hogue Over Molded pistol grip is fitted for comfort. Though no forend is included, the shooter can simply wrap the weak hand around magazine and well for two handed shooting.

mspasfeh060

-

Hogue pistol grip

The Finest Handgun Grips and Rifle Hogue Grip
Hogue produces the finest Handgun Grips in the world, along with a growing line of OverMolded rifle and shotgun stocks, holsters, grip screws and other great firearm accessories. Please review the product overview section for a general overview of our products. Or visit our online store and browse through our extensive selection of fine firearm products. Our extensive online store contains detailed descriptions and over 4000 products with thousands of great product photographs. Every variation of exotic wood and rubber grips, rifle and shotgun stocks, recoil pads, holsters and accessories is listed! Simply go to the store, click browse and choose a category - its that easy.
The online store is great to check out our products but please support your local dealer!Hogue Hand gun gripproducts are available from your local firearms dealer and we encourage you to buy our Hogue pistol grip from them whenever possible. CLICK HERE to find a Hogue dealer near you. Of course, if you prefer you may order direct by phone or through our online store.
You may also check out HogueAuction.com to bid on slightly blemished wood grip “seconds” as well as selected wood grips with outstanding and unusually figured grain.
Looking for an unusual gift? Visit HOGUEINC.COM to see the other unique and innovative products we make for the Home and Workshop.
If you experience any problems with this site please E-Mail webmaster@hogueinc.com
Thank you for your interest in Hogue Grip.

mspasfeh045

-

AR15

Mounting Solutions Plus (MSP) is a distributor of A.R.M.S. Mounts , PRI, AIMPOINT Comp Scopes and other high quality shooting products for the discriminating shooter in the varmint, competition and tactical disciplines. Our line of bases and rings are without peer and will team most popular bolt actions to the finest scopes. Also included are mounts for reflex or red dot sights; such as, the Holosight and the Aimpoint Comp.

mspasfeh052

-